Approx APPPCL5 Guide de l'utilisateur télécharger pdf (Page 25)

6 How to Use the Reset\Security Pushbutton

This chapter describes how to use the Reset\Security pushbutton to add new

devices into or remove devices from a HomePlug AV logical network (AVLN).

You can monitor the operation progress and results by observing the Power LED

status.

6.1 Forming a HomePlug AV logical network

Scenario:

Devices A and B with different NMK values are connected to the same powerline.

Users want to use them to form a logical network.

Figure 16 Form a HomePlugAV network

Do as follows to form a logical network:

Step 4 Press the Reset\Security pushbutton on device A or B for about 5-8

seconds. The device will reset and restart with a random NMK.

Step 5 Press the Reset\Security button on device A for less than 3 seconds.

Step 6 Within 2 minutes, press the Reset\Security button on device B for less

than 3 seconds.

Step 7 Wait for connection to complete.

The power indicator on both devices will flash evenly at 1 second intervals until the

operation succeeds or fails. If the connection succeeds, the Power and Data

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31

Pas de commentaire

Approx APPPCL5 Guide de l'utilisateur Page 25